Shop
wood + 3d-prints
- lamps
projects
- bedside table Peri
- bedside table Ari
- living room side table
- rocking chair
- modular boxes electronic components
- boat bed and tent
drawers for ninja and stuff
- max opening is 13x19 3/4
- have material for slides and drawers
- maybe use 3d printer to make compartments for stuff
raise couches for robovac
- vacuum ins 4" high, needs 4-1/4 min. couch sags in middle
- measure 5x5 tapering to 3-3/4 x3-3/4 in 2-1/4
- fabricate
- repair couch, replace bottom cover with tyvek 37" x <8'
- purchase floor protectors
plant tripod stands
- prototypes are done
- angles vary, pieces not interchangeable
frame artwork
- check artwork and matt boar dimensions
- choose matting board (color) and order it
non-shop projects
redo outdoor lighting
without motion detector and dimming
- order auto bulbs ✓
- order daylight sensors ✓
shop reno tasks
- decide on projects to build ✓
- major layout decisions, where will the dust collector go? for sound. How will the table saw +big tool piping go.✓
- prototype overhead ducting and test
- check outlets for smaller tools that need dust collection.
- design small tool dust collection system. portable? one for bench? one for chop box?
- fix band saw ✓
- find positions for drill press and band saw ✓
- redesign chop saw table and incorporate 4" planer ✓
- test planer for use without shaper
dust
stepper motors
https://www.engineersgarage.com/stm32/controlling-stepper-motor-with-stm32-microcontroller/
Maybe hard piped from the table saw with a flexible branch for shaper/planer/other. Where to locate?
https://thewoodwhisperer.com/articles/dust-collector-for-power-hand-tools/
...A shop vac would not be adequate for the tablesaw. And if you buy a dust collector, I would indeed advise getting a shop vac or some other dust extraction system for the smaller tools. Although technically, you could get away with using the dust collector for a while, especially at close range. But you might simply wind up air starving the dust collector. So really, this is one of those times I whole heartedly recommend both.
http://www.artofwoodshopdesign.com/dust-collection-system-layout/
https://www.youtube.com/watch?v=qjI5l4nF9AM
https://www.finewoodworking.com/forum/dust-collection-with-outside-venting
blast gat controls made of wood
tools
Jet Shaper
- model
- JWS-18HO 1HP
- manual
- stock no
- 708319 serial: 4111744
https://www.toolbarn.com/blogs/parts-schematics/jet-jws-18ho-wood-shaper-250432
Fig 1 - 4 BB-6005ZZ BALL BEARING(2)
https://www.amazon.com/6005ZZ-Shielded-Bearing-25x47x12-Bearings/dp/B002BBJRIW
Craftsman 4-3/8" jointer
- model
- 103.23340 King Seeley manual
https://www.amazon.com/4-3-HSS-Planer-Blades-Craftsman/dp/B002O7G02E
Grizzly 14" Z-SERIES BANDSAW
- MODEL G1019Z manual
Summary: This is a minor edit Watch this page Please note that all contributions to Wiki2 may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here. You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see Wiki2:Copyrights for details). Do not submit copyrighted work without permission!
Navigation
Main page
Recent changes
Random page
Help about MediaWiki
Wiki tools
Upload file
Special pages
Page tools
Move
More
What links here
Related changes
Page information
Page logs
Powered by MediaWiki
Privacy policyAbout Wiki2Disclaimers
use agreement for shop and pool room
Shop regulations
- No combustibles stored within 3' of wood stove
- No VOC or flammable liquid storage in the wood stove half of the shop
- No VOC or flammable liquid use when the wood stove is being used.
- Do not store lumber on table saw, its outfeed table or the Slide Mitre Saw and its outfeed table
- Do not store framing lumber or pressure treated lumber in shop
After working on a project:
- use blower or shop vac on stationary tools and their tables
- use blower or shop vac to clean workbench and tools and shelves around it
- empty table saw dust bag if more than 1/2 full
- cut up scrap suitable for burning into stove size pieces
- empty trash if more than 1/2 full
- sweep or vacuum floor
- sharpen/replace any blades that have been dulled, replace any that or are warped or damaged.
for shop and pool room
- no smoking anywhere in shop/garage
- no butts on ground outside
- return pool table to pool table state before leaving
- no drinking and using power tools except drills
- if guests need something they need to ask Noah, Peri or Tim
