Cad

new layout

1. insert/layout/layout_from_template/favorites/cadfiles/templates/letter.dwt
2. edit txt to name drawing (same for layer/ucs/view and layout , name layout
3. layer/new/name make current setcolor
4. mview select 2 points double click inside VPon new layer
5. layer filter for wireframe
6. VPon for wireframe
7. layer filter for current view
8. draw surface you want to work on
9. VPoff other layers
10. UCS3 pick_points <ret><ret>/NA/enter_name<ret>
11. plan<ret><ret> gets u on current ucs
12. z<ret>w zoom to where you want to work
13. view<ret>n/viewname<ret><ret>

• from ps double click on viewprt to fill screen

interupting command to zoom (transparent zoom)

• 'z<ret>

So you can do what AutoCAD calls a transparent zoom, a zoom in the middle of a command without interrupting the command. Type 'z<cr> and then type .2x<cr> to indicate that you want the new display to reduce the size of the drawing to one fifth the current size.

• plan<ret><ret> -plan view of current ucs