Cascada 2.0

<syntaxhighlight lang="cpp" line='line'>

1. include "CONFIG.h"

/*INSTRUCTIONS

• be sure to modify FLAGS for HAYpROGS and HAYtIMRS
• /

/*CUSTOM CODE Transformer D8 activated when either D5,D6 or D7 hi srs.ti[0] (sr 0) onoff for D5 srs.ti[1] (sr 1) onoff for D6 srs.ti[2] (sr 2) onoff for D7 (see srs.ti_t and prgs.prg_t) otherwise make some DUMMY custom function void customInit(){

 if(0==1){
   int dog =3;
 }

}; void customLoop() {

 if(0==1){
   int dog =3;
 }

};

• /

void customInit(){

 pinMode(D8, OUTPUT);
 digitalWrite(D8, HIGH);

} void customLoop(){

 int bef = digitalRead(D8);
 if(srs.ti[0].onoff==1 || srs.ti[1].onoff==1 || srs.ti[2].onoff==1){
   digitalWrite(D8, HIGH);
 }else{
   digitalWrite(D8, LOW);
 }
 int aft = digitalRead(D8);
 if(aft != bef){
   Serial.print("D8 is ");
   Serial.println(aft);
 }

}

/*DESCRIPTION Cascada Pond D5 OUT when on acivates lohi water circuit+relay

 and pond pumps relay (120V)

Garden D6 & D7 OUT irrigation activate (24V) Transformer D8 activated when either D5,D6 or D7 hi hay NO sensors connected to esp8266 CONFIG_CYURD116cascada running on espboth/secsti has CUSTOM CODE

• /

/*LOCID 10-12ParleyVale

• /

/*SERVER dev extern device variables*/ char devid[9]="CYURD116"; char owner[254]="xxxx"; char pwd[24]="xxxx"; char mqtt_server[60]="sitebuilt.net"; char mqtt_port[6]="1884"; /*dev*/

/*SPECS CONFIG extern const device variables INCOMING const mqtt topics*/ const topics_t TPC {

 5,
 {"devtime", "cmd", "prg", "req", "set"}

}; /*PORTS for INPUT*/ const portsin_t inpo {

 0, //DS18b20a
 0, //DS18b20b
 0,//dht11
 0, //ANALOG
 0, //SPIdo
 0, //SPIcs
 0};//shares i2c D2 and D1

/*SE constant declarations*/ const sen_t SE {

 0,//number of different sensor types
 0,//number of sensors(numsens)
 {}

}; /*------------------------------------------------------ CONFIG extern structures (initial values, changeable)*/ /*srs extern data structure initalization state of relays and sensors */ srs_t srs {

 3,//numsr
 0,//sumse
 {},
 0,//numcs
 {},
 3,//numti
 { //{sr,onoff,rec,isnew}
   {0,0,1,0},{1,0,1,0},{2,0,1,0}
 }

}; /*prgs extern data structure initalization*/ prgs_t prgs{

 3,//numprgs
 { //sr,aid,ev,numdata,prg[[]],port,hms
   {0,255,1,1,Template:0,0,0,D5,1506}, //pond
   {1,255,1,1,Template:0,0,0,D6,1504}, //hi_bed
   {2,255,1,1,Template:0,0,0,D7,1503}  //lo_bed
 }

}; /*flags extern data structure*/ flags_t f {//MODIFY HAYpROG and HAStIMR

 0,//aUTOMA
 0,//fORCErESET
 5,//cREMENT
 7,//HAStIMR 00000111 =1+2+4=7
 0,//IStIMERoN
 7,//HAYpROG 00000111 =1+2+4=7
 1023,//HAYsTATEcNG
 0,//CKaLARM
 0,//ISrELAYoN
 {0,0,0,0,0,0,0,0,0,0}//tIMElEFT[10]

};

// nxtalarr_t nxtal { // 0,//num // {//sr,aid,hms (h*60+m)*20+sr // {0,255,29000}, // {1,255,29000}, // {2,255,29000}, // {3,255,29000}, // {99,255,29001}, // {99,255,29002}, // {99,255,29006}, // {99,255,29004}, // {99,255,29000}, // {99,255,29000} // } // };

// const srpos_t outpos { // 3, //numpos // {{2,D0}, {7,D3}, {8,D4}} //pod.sr,pod.portnum // };

</syntaxhighlight>