Cascada 2.0 - Revision history

Tim: /* digitalRead is weird */

2022-05-09T22:09:30Z

digitalRead is weird

← Older revision		Revision as of 18:09, 9 May 2022
Line 5:		Line 5:
	Adding 2 digital input for empty and full on D1 and D2. inpo.inp1 = D1 = 4 but digitaRead(inpo.inp1) does not work, you have to use digitalRead(D1)		Adding 2 digital input for empty and full on D1 and D2. inpo.inp1 = D1 = 4 but digitaRead(inpo.inp1) does not work, you have to use digitalRead(D1)

	Changed req:pubState ln222 from		Changed req:pubState() ln222 from
	int bit =pow(2,i);		int bit =pow(2,i);

2022-05-09T22:08:58Z

log

← Older revision		Revision as of 18:08, 9 May 2022
Line 4:		Line 4:

	Adding 2 digital input for empty and full on D1 and D2. inpo.inp1 = D1 = 4 but digitaRead(inpo.inp1) does not work, you have to use digitalRead(D1)		Adding 2 digital input for empty and full on D1 and D2. inpo.inp1 = D1 = 4 but digitaRead(inpo.inp1) does not work, you have to use digitalRead(D1)

			Changed req:pubState ln222 from
			int bit =pow(2,i);

			to
			int bit =pow(2,srs.se[i].sr);

	==cascada water level repair spring 22==		==cascada water level repair spring 22==
	try		try

2022-05-09T21:18:31Z

← Older revision		Revision as of 17:18, 9 May 2022
Line 1:		Line 1:
			==log==
			===digitalRead is weird===
			5/9/22

			Adding 2 digital input for empty and full on D1 and D2. inpo.inp1 = D1 = 4 but digitaRead(inpo.inp1) does not work, you have to use digitalRead(D1)
	==cascada water level repair spring 22==		==cascada water level repair spring 22==
	try		try

2022-03-21T20:47:28Z

← Older revision		Revision as of 16:47, 21 March 2022
Line 12:		Line 12:

	==config==		==config==
	<~~syntaxhighlight lang="cpp" line='line'~~>		<pre>
	#include "CONFIG.h"		#include "CONFIG.h"
	/*INSTRUCTIONS		/*INSTRUCTIONS
Line 161:		Line 161:
	// };		// };

	</~~syntaxhighlight~~>		</pre>

	https://sitebuilt.net/files/info/wiki/tech/Cascada2pcb.png		https://sitebuilt.net/files/info/wiki/tech/Cascada2pcb.png

2022-03-21T20:43:34Z

cascada water level repair spring 22

← Older revision		Revision as of 16:43, 21 March 2022
Line 2:		Line 2:
	==cascada water level repair spring 22==		==cascada water level repair spring 22==
	try		try
	# test for continuity and shorts		# test for continuity and shorts &check;
	# turn on comparator ckt all the time		# turn on comparator ckt all the time
	# with opamps always on @3.3v, connect each to 2 new inputs and relay to 1 new output		# with opamps always on @3.3v, connect each to 2 new inputs and relay to 1 new output

2022-03-21T20:40:40Z

← Older revision		Revision as of 16:40, 21 March 2022
Line 1:		Line 1:

	==cascada water level repair spring 22==		==cascada water level repair spring 22==
	try		try

2022-03-19T20:14:38Z

cascada water level repair spring 22

← Older revision		Revision as of 16:14, 19 March 2022
Line 5:		Line 5:
	# with opamps always on @3.3v, connect each to 2 new inputs and relay to 1 new output		# with opamps always on @3.3v, connect each to 2 new inputs and relay to 1 new output
	;what was wrong with the pcb anyway?: pin 5 and 6 on the lm324 op amps are shorted		;what was wrong with the pcb anyway?: pin 5 and 6 on the lm324 op amps are shorted
			:R8 is shorted to R5/6

	==opamp as comparator==		==opamp as comparator==

2022-03-19T19:56:00Z

cascada water level repair spring 22

← Older revision		Revision as of 15:56, 19 March 2022
Line 4:		Line 4:
	# turn on comparator ckt all the time		# turn on comparator ckt all the time
	# with opamps always on @3.3v, connect each to 2 new inputs and relay to 1 new output		# with opamps always on @3.3v, connect each to 2 new inputs and relay to 1 new output
			;what was wrong with the pcb anyway?: pin 5 and 6 on the lm324 op amps are shorted

	==opamp as comparator==		==opamp as comparator==

2022-03-19T19:04:38Z

cascada water level repair spring 22

← Older revision		Revision as of 15:04, 19 March 2022
Line 1:		Line 1:
	==cascada water level repair spring 22==		==cascada water level repair spring 22==
			try
	# test for continuity and shorts		# test for continuity and shorts
	# turn on comparator ckt all the time		# turn on comparator ckt all the time

2022-03-19T19:04:20Z

← Older revision		Revision as of 15:04, 19 March 2022
Line 1:		Line 1:
			==cascada water level repair spring 22==
			# test for continuity and shorts
			# turn on comparator ckt all the time
			# with opamps always on @3.3v, connect each to 2 new inputs and relay to 1 new output

	==opamp as comparator==		==opamp as comparator==